Table readers
The Unique 125kHz or Mifare 13,56Mhz proximity table reader, equipped with 220V power supply and RS232 serial cable; or USB self-powered version.
Long range
Solutions for reading passive UHF vehicle tags with long range aerials capable of reading as far as 12 metres.
The XL141 concentrator terminal is equipped with a microprocessor and internal clock allowing it to function in an autonomous stand-alone mode, allowing or denying access to users with a Tag depending on the programming. This is easily carried out using the terminal’s WEB interface and it is possible to insert each card with the relative expiry ate and the times/days of the week when access is allowed.
As an alternative to stand-alone operations, the XL141 unit may also be connected in a network using a management software which supervises the entire area and grants in real time the entrance and exit transit of each vehicle. The management software provides many more functions, such as the “full area” management, the visualization of the state of the vehicles within the area and the management of any access points and pedestrian transits.
Proximity Micro-terminal
Proximity reader for access control and for MoneyCard degressive credit applications. RS485 communication interface.
Fingerprint reader terminal
The biometric XF8T reader may be installed stand-alone or connected with any central unit which supports Wiegand 26-bit. A fat, reliable and high performing terminal; each reader can memorize up to 1,500 fingerprints and 50,000 transitions.
Programmable reader terminal
Access control terminal with display, integrated proximity reader, gate control relay, Ethernet communication interface and web interface allowing control and configuration using the web. The terminal is equipped with a microprocessor and internal clock which allow it to operate autonomously for some functions.
The Terminal is equipped with three serial communication ports which allow installation of one or more readers for the most common technologies, barcode, proximity readers or magnetic cards. On the gates which allow his, it is also possible to obtain a complete integration.
Stand-alone Terminal
A terminal for access control with a large-sized 128×64 Pixel display, integrated proximity reader, gate control relay, Ethernet communication interface and web interface which allows the introduction of cards with access limitations, entrances and access times.
The terminal is equipped with a microprocessor and internal clock allowing it to operate autonomously, allowing or denying access to users depending on the programming. This can be managed easily using the terminal’s WEB interface; Cads may be inserted with their expiry date, the number of accesses and the time/days of the week when access is allowed.
Presence control terminals
The terminal for presence control with large display, 128×64 Pixels, integrated proximity reader, Ethernet communication interface and Web interface allowing to visualize presence, insert cards with expiry limitations, and Web Interface which allows viewing presence data, inserting cads with expiry dates, entrance and exit times.
Functions: the terminal is equipped with a microprocessor and internal clock which enables it to function autonomously. The terminal may function both online, connected to the access control server, and offline, recording the entrance and exit of users. When offline, programming is easily carried out using the WEB interface of the terminal where the cards with their expiry dates ad working hours category may be inserted.
Stand-alone barcode validator terminal
A terminal for access control with a large 128×64 pixel display. Integrated barcode reader, gate control relay, Ethernet communication interface and web interface allowing to consult the transits.
The terminal is equipped with a microprocessor and internal clock which enables it to function autonomously, granting or denying access to users depending on the barcode shown. The barcode is identified using and anti-counterfeit algorithm including time variables which may be selected depending on the day, month, year and time.
Stand-alone barcode validator terminal
Terminal for access control with large sized 128×64 pixel display. Integrated barcode reader, gate control relay, Ethernet communication interface and web interface allowing to consult the transits.
The terminal is equipped with a microprocessor and internal clock which enables it to function autonomously, granting or denying access to users depending on the barcode shown. The barcode is identified using and anti-counterfeit algorithm including time variables which may be selected depending on the day, month, year and time.
Programmable reader terminal
Proximity access control reader terminal made up of reading point, which may also be installed eternally provided it is IP65, with an internal Ethernet unit with a Web management interface. The IP65 external reading point lights up completely when the card is read going from blue to red in case of “access denied” or to green in case of “access allowed”.
The change of status is accompanied by an acoustic signal.
Wiegand readers
Access control terminal compatible with Wiegand 26/34bit readers, gate control relay, Ethernet communication interface and web interface allowing control and configuration via network. Wiegand readers maybe used both for indoor and outdoor applications. The readers are characterized by a simple and essential design, great strength and ease of connection and installation. Green/red LED lights change colour and show allowed or denied access. They allow reading proximity tags as far as 10 cm for the P series and 5 cm for the F series.
Readers are IP65, completely resin coated, water-proof and function with a temperature range as wide as -20°C to +65°C.
Card withdrawal column
Stainless steel column equipped with motorized reader capable of accepting magnetic and/or RfID Mifare Cards. The Cards are accepted verified, re-written and returned or withheld and stored within the Column. The Column is equipped with an Access Control terminal with an integrated large-sized 128×64 pixel display, with a proximity reader on the surface for the use of RFID bracelets, gate control relay, Ehternet communication interface and web interface. Two doors with lock and key allow to recover the withdrawn cards.
Shower and hair dryer money card control panel
Solutions for the delivery of payment services such as Showers, Hair Dryers or drink vending machines, using RFID tags, cards bracelets or key-chains.
The card may be purchased without any credit or pre.-charged with 5, 10, 20 or 50 Euro, recharged at the reception or recharged autonomously at the automatic cash point.
The unit is fitted with an RFID tag reader/writer, light signal, sound buzzer and can directly manage electro-valves or power relays. Each unit may be programmed to activate the device for a given length of time only after having withheld a defined amount from the RFID tag. Units are provided in an IP65 plastic box suitable for operations in humid environments such as dressing rooms of swimming pools and fitness centres.
Remote control receiver reader terminal
This terminal reader allows to receive the identifying serial number of the remote control treating it simply as if it were the code of a card used for access control. Combined with the Management software, it allows management of authorizations for access control in parking lots or private condominiums.
Reader terminal
Reader terminals with red/green indicator light for the opening of doors to be installed in a walled-in plastic P504 box.
Electronic lock with code-RFID-fingerprint
This electronic lock allows to secure access to a door. The lock allows to verify the user by means of a Code-Password, fingerprints or an RFID card (only for XL5000). User programming is carried out using an OLED display.
